【專題講座】Advanced micromachining of glass
日本千葉大學 比田井洋史 教授
Advanced micromachining of glass
Professor Hirofumi Hidai
Chiba University, Department of Mechanical Engineering
【活動資訊】
In this presentation, two topics about laser- induced micromachining of glass are introduced.First topic is metal particle manipulation by laser irradiation in glasses. Laser illumination to the metal particle in glass heats the metal particle. The glass in the neighborhood of the laser-heated metal particle softened; hence, the metal particle is able to migrate in the glass. The migration phenomena and the driving force of the metal particle toward the light source in the glass provided by laser illumination were discussed. The variation in the interfacial tension between the glass and the metal particle induced by the temperature gradient caused migration and driving force was calculated via a numerical temperature calculation.
Second topic is laser-induced plasma drilling of silica glass. Fiber fuse is a phenomenon that plasma runs in an optical fiber toward the light source. Fiber fuse is initiated when the fiber is heated above 1,050˚C, because it becomes absorptive. I applied this phenomenon for the drilling of glass. When the plasma region was reached to the glass surface, the glass material was ejected. As a result, a hole was drilled and the shape was the same as the plasma. The hole formation process was observed with a high speed camera.
【Speaker’s Biography】
Dr. Eng. in Mechanical Engineering, Tokyo Institute of Technology, Tokyo, Japan.Professor since April, 2017. Department of Mechanical Engineering, Chiba University, Chiba, Japan
Associate Professor April, 2010 – March 2017. Department of Mechanical Engineering, Chiba University, Chiba, Japan
Visiting scholar March, 2006 – March 2008. Department of Mechanical Engineering, University of California at Berkeley, USA
Assistant Professor April, 1999 – March 2010. Department of Mechanical Science and Engineering, Tokyo Institute of Technology, Japan
Chef Secretary in Manufacturing & Machine Tool Division, The Japan Society of Mechanical Engineers (2016-2017)
Board member in The Japan Society for Abrasive Technology (2015-2017)
【Honors】
▍JSPE Best Paper Award (2015) from The Japan Society for Precision Engineering▍Best Paper Award (2014) from Machine Tool Engineering Foundation
▍JSPE Best Paper Award (2013) from The Japan Society for Precision Engineering
▍JSAT Young Researcher Award (2012) from The Japan Society for Abrasive Technology
▍JSAT Paper Award (2010) from The Japan Society for Abrasive Technology
▍JSPE Award (2002) from The Japan Society for Precision Engineering
【活動資訊】
▍日 期 : 2017 / 10/ 03 (二) 10:00~ 12:00▍地 點 : 逢甲大學第六國際會議廳
▍費 用 : 報名費NT$600。聯盟會員、受邀持邀請函者、電聲學程學生報完名後免費參加，本活動採預先線上報名並完成登錄手續。
主辦單位保留資格審核權，活動前將發送報到通知以示您的出席資格，請勿偽造他人身份資料進行報名以免觸犯法律。
▍線上報名：請於活動官網下方【報名表單】填寫報名資料。
【活動窗口】
▍活動聯絡人：電聲聯盟 / 林小姐▍電話：04-24517250 #6430
▍E-mail：chinghlin@fcu.edu.tw
【注意事項】
▍於開課前兩天，未收到報名成功通知者，請主動與電聲聯盟聯絡，謝謝!▍如資料不全或不實，即為無效報名。
▍聯盟保留取消課程之權益，若確定開課，參與人數不足則將取消活動並全數退費 。
▍本次活動若適逢天災(地震、颱風等)不可抗拒之因素，將延期舉辦時間另行通知。
▍若因不可預測之突發因素，主辦單位得保留研討會課程及講師之變更權利。
主辦單位 : 電聲產學技術發展與驗證聯盟、逢甲大學電聲碩士學位學程
look more event photos